1/15
SmartWatch Sync & Bluetooth notifier screenshot 0
SmartWatch Sync & Bluetooth notifier screenshot 1
SmartWatch Sync & Bluetooth notifier screenshot 2
SmartWatch Sync & Bluetooth notifier screenshot 3
SmartWatch Sync & Bluetooth notifier screenshot 4
SmartWatch Sync & Bluetooth notifier screenshot 5
SmartWatch Sync & Bluetooth notifier screenshot 6
SmartWatch Sync & Bluetooth notifier screenshot 7
SmartWatch Sync & Bluetooth notifier screenshot 8
SmartWatch Sync & Bluetooth notifier screenshot 9
SmartWatch Sync & Bluetooth notifier screenshot 10
SmartWatch Sync & Bluetooth notifier screenshot 11
SmartWatch Sync & Bluetooth notifier screenshot 12
SmartWatch Sync & Bluetooth notifier screenshot 13
SmartWatch Sync & Bluetooth notifier screenshot 14
SmartWatch Sync & Bluetooth notifier Icon

SmartWatch Sync & Bluetooth notifier

OnSoft
可信任
20K+下载次数
35.5MB大小
Android Version Icon5.1+
Android版本
360.0(21-02-2024)最新版本
4.1
(9 评价)
Age ratingPEGI-3
详情评价版本信息
1/15

介绍 SmartWatch Sync & Bluetooth notifier

“Smartwatch Sync” application allows establishing a Bluetooth connection between android device and android smartwatch or Android Wear smartwatch.

When Smartwatch Sync is configured on both devices, SmartWatch Sync will display all notifications from your phone on your smartwatch screen.


“Smartwatch Sync” works with all android/ android Wear watches! All of china’s watches are supported.


Step-by-step guide

(Full GUIDE with illustrations is available on our site: smartwatchsync.icu)


1. Install SmartWatch Sync & Bluetooth notifier from Google Play BOTH on your Smartphone and Smartwatch device


2. Open SmartWatch Sync on your smartwatch. Click “Enable Bluetooth” button. Afterward, make Smartwatch discoverable by clicking “Make discoverable”.


3. Open Smart watch Sync app on your phone. Press "Enable Permissions" to allow SmartWatch Sync to access notifications. You will be sent to the Notification Settings screen of your phone, where you should Turn on tumbler for SmartWatch Sync. After you are done with settings, click back, to be redirected to SmartWatch Sync bt notifier app.


4. Click “Enable Bluetooth” and, after BT is enabled, click “Connect device”.


5. Find from the appeared list the bluetooth name of your Smart watch device and connect it.


6. Press "Pair/Ok" on both your devices and confirm pairing devices, if needed (click ok/allow).

Done! Your android phone and android/wear watch are now connected!


Test your connection


You can test a connection by entering any text inside textinput “Send msg” field on your device. The bt notification should appear on your smart clock on the screen.


Consider buying PRO version:


1. No ads!


2. Ability to turn on/off notifications for specific applications. Set android smart watch app to only important notifications. For example only for messengers, so that other app’s notifications wouldn’t bother you.


3. Notification themes. Choose for each of your app one of many cool notification themes, so you could enjoy your bt connection even more!


Smartwatch Synchronization & bt notice app works with all watches, based on Android or Android Wear, such as:

- Samsung watch models;

- China’s watches: garmin watch, fossil watch, ticwatch, fitbit watch, mobvoi, misfit, grape, fundo, kurio and many others!


Q&A


1. Bluetooth Pairing

Determine which pairing process or clock synchronization your device employs. The process for pairing devices can vary. Sometimes, for example, it involves tapping a code into your phone. Other times, you can just physically touch your phone to the device you want to pair it with. In some cases, you only have to hold down a button on the speaker to pair it with a phone. If you’re not sure how to pair a device, refer user guide.


2. Discoverable mode

Turn on discoverable mode on your swatch. Let’s say you want to pair your phone with your car’s infotainment system. First, go into your phone’s or iwatch app settings and tap on Bluetooth. Then depress the buttons on your infotainment system, usually on the steering wheel or center stack, to get it looking for the device. Done.


Problems with BT pairing


1. Make sure the devices you are trying to pair are close each to other. Do not try to pair a phone with a keyboard or not Android/Android Wear bluetooth based devices.


2. Power the devices off and back on. A soft reset can resolve an issue.


3. Let’s say that a faithful bluetooth connector speaker usually connects to your partner's smartphone itouch instead of yours. If you're having trouble with clock synchronization of your phone with the speaker, or wristwatch cuz speaker or iwatch is trying to activate its usual connection. Some older devices just try to connect with the last thing they paired with. If a Bluetooth device was previously paired with something else, turn off that other gadget.


4. Charge up both devices you're trying to pair. Some devices have smart power management that may turn off Bluetooth if the battery level is too low.

“ Smartwatch Sync”应用程序允许在android设备与android smartwatch或Android Wear smartwatch之间建立蓝牙连接。

在两台设备上都配置了Smartwatch Sync后,SmartWatch Sync将在您的Smartwatch屏幕上显示来自您手机的所有通知。


“ Smartwatch Sync”适用于所有android / android Wear手表!支持中国所有手表。


分步指南

(带有插图的完整指南可在我们的网站上找到:smartwatchsync.icu)


1.在智能手机和Smartwatch设备上从Google Play上安装SmartWatch Sync和Bluetooth通知程序


2.在您的智能手表上打开SmartWatch Sync。点击“启用蓝牙”按钮。然后,通过单击“使可发现”使Smartwatch可被发现。


3.在手机上打开智能手表同步应用。按“启用权限”以允许SmartWatch Sync访问通知。您将被发送到手机的“通知设置”屏幕,在此处应打开不倒翁的SmartWatch Sync。完成设置后,请单击“上一步”以将其重定向到SmartWatch Sync bt通知程序应用程序。


4.单击“启用蓝牙”,然后在启用BT后,单击“连接设备”。


5.从出现的列表中找到您的智能手表设备的蓝牙名称并进行连接。


6.在两个设备上均按“配对/确定”,并在需要时确认配对设备(单击“确定” /“允许”)。

做完了!您的android手机和android / wear手表现已连接!


测试您的连接


您可以通过在设备上的textinput“ Send msg”字段中输入任何文本来测试连接。 bt通知应出现在屏幕上的智能时钟上。


考虑购买PRO版本:


1.没有广告!


2.能够打开/关闭特定应用程序的通知。将android智能手表应用设置为仅重要通知。例如仅针对Messenger,这样其他应用程序的通知就不会打扰您。


3.通知主题。为您的每个应用程序选择许多很酷的通知主题之一,这样您就可以享受更多的bt连接了!


Smartwatch Synchronization&bt notice app可与所有基于Android或Android Wear的手表配合使用,例如:

-三星手表型号;

-中国的手表:garmin手表,化石手表,ticwatch,fitbit手表,mobvoi,misfit,葡萄,fundo,kurio等!


问答环节


1.蓝牙配对

确定设备采用哪种配对过程或时钟同步。配对设备的过程可能会有所不同。例如,有时它涉及在您的手机中输入代码。有时,您只需将手机与要配对的设备实际接触即可。在某些情况下,您只需按住扬声器上的按钮即可将其与手机配对。如果不确定如何配对设备,请参阅用户指南。


2.可发现模式

打开色板的可发现模式。假设您想将手机与汽车的信息娱乐系统配对。首先,进入手机或iwatch应用设置,然后点击“蓝牙”。然后按下您的信息娱乐系统上的按钮(通常是方向盘或中心堆栈上的按钮),让它寻找设备。做完了


BT配对问题


1.确保您要配对的设备彼此靠近。不要尝试将手机与键盘配对,或者不要将Android / Android Wear蓝牙设备配对。


2.关闭设备电源,然后重新打开。软重置可以解决问题。


3.假设忠实的蓝牙连接器扬声器通常连接到伴侣的智能手机itouch,而不是您的智能手机。如果您无法将手机与扬声器的时钟同步,或者手表cuz扬声器或iwatch尝试激活其通常的连接。一些较旧的设备仅尝试连接与其配对的最后一件东西。如果以前将蓝牙设备与其他设备配对,请关闭该其他小工具。


4.给您要配对的两个设备充电。有些设备具有智能电源管理功能,如果电池电量太低,可能会关闭蓝牙。


SmartWatch Sync & Bluetooth notifier - 版本360.0

(21-02-2024)
其他版本
新特性Bug fixAdded Support via Facebook MessengerNew fancy smartwatch screen design + improve smartwatch notification designAdded flashlight to smartwatch

还没有评论或评分!要留下第一条评论或评分,请

-
9 Reviews
5
4
3
2
1
Info Trust Icon
保证非恶意应用此应用已通过病毒、恶意软件和其他恶意攻击的安全测试,不含任何威胁。

SmartWatch Sync & Bluetooth notifier - APK信息

APK版本: 360.0程序包: com.OnSoft.android.BluetoothChat
Android兼容性: 5.1+ (Lollipop)
开发商:OnSoft隐私政策:http://vdroid.pro/privacy_policy.html权限:26
名称: SmartWatch Sync & Bluetooth notifier大小: 35.5 MB下载次数: 6.5K版本: 360.0发布日期: 2024-03-19 23:09:49最小屏幕: SMALL支持的CPU:
程序包ID: com.OnSoft.android.BluetoothChatSHA1签名: C4:66:FD:CB:C8:8E:E6:DF:5C:F3:31:E8:1D:58:95:4B:C8:49:E8:5D开发商 (CN): Alex组织 (O): Onsoft本地 (L): Khmelnistkiy国家/地区 (C): 29000州/市 (ST): UA

SmartWatch Sync & Bluetooth notifier的最新版本

360.0Trust Icon Versions
21/2/2024
6.5K 下载次数15 MB 大小

其他版本

358.0Trust Icon Versions
15/2/2024
6.5K 下载次数15.5 MB 大小
357.0Trust Icon Versions
14/2/2024
6.5K 下载次数15.5 MB 大小
356.0Trust Icon Versions
13/2/2024
6.5K 下载次数15.5 MB 大小
355.0Trust Icon Versions
31/1/2024
6.5K 下载次数15.5 MB 大小
354.0Trust Icon Versions
12/1/2024
6.5K 下载次数15.5 MB 大小
353.0Trust Icon Versions
5/1/2024
6.5K 下载次数15.5 MB 大小
352.0Trust Icon Versions
31/12/2023
6.5K 下载次数15.5 MB 大小
351.0Trust Icon Versions
31/12/2023
6.5K 下载次数15.5 MB 大小
349.0Trust Icon Versions
20/12/2023
6.5K 下载次数15.5 MB 大小
同类应用
您可能还会喜欢……